Neutrik NO2-4FDW-1-A opticalCON DUO Chassis Connectors
- Buy 10 for £64.24 each and save 16%
Features & Benefits
- Suggested OEM equipment connector due to LC front compatibility
- Designed as feedthrough with automatic sealing shutter
- Shutter with silicone gasket protects optical connection from dust and dirt
- Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
- Accommodates standard LC connectors on the rear for simple installation
- Connection on the front side either by rugged opticalCON or standard LC connector
- The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
- IP65 ingress protection in mated condition with SCDP-*
- Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard:
Multimode - black
Single mode PC - blue
Single mode APC - green
Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65 ingress protection in mated condition with SCDP-*.
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.
Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
Attention! - Product Update
Improved contacts to allow indoor camera routing applications (pollution degree 1, overvoltage category 1) acc. to IEC 60664 up to 240 V ac.
Technical Information
Product
| Title | NO2-4FDW-1-A |
| Gender | Female |
Electrical
| Contact resistance | < 7 mΩ |
| Dielectric strength | 1,5 kVdc |
| Insulation resistance | > 2 GΩ (initial) |
| Rated current per contact | 6 A |
| Rated voltage | < 50 V (1) |
| Ground contact |
Faston 2.8 x 0.5 (soldering possible) |
Mechanical
| Insertion force | < 45 N |
| Withdrawal force | < 45 N |
| Lifetime | > 5000 mating cycles |
| Locking force | 1000 N |
| Wiresize | |
| Locking device | Push-Pull |
| Mounting direction | Front mounting |
| Chassis shape | D |
Material
| Contacts | Bronze (CuSn6) |
| Insert | Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR) |
| Shell | Zinc diecast (ZnAl4Cu1) |
| Shell plating | Black chromium |
| Strain relief | ceramics |
Environmental
| Standard compliance | UL 94 V-0 |
| Temperature range | -40 °C to +75 °C |
Optical
| Insertion loss | < 0.4 dB / connection |
| Optical connector | LC-Duplex Feedthrough |
| Downloads Data | https://directcablesystems.com/media/downloads_data/3d_ansicht_no2-4fdw-1-a.stp https://directcablesystems.com/media/downloads_data/strichzeichnung_no2-4fdw-1-a.pdf https://directcablesystems.com/media/downloads_data/strichzeichnung_no2-4fdw-1-a.dxf https://directcablesystems.com/media/downloads_data/bda_520_v2-opticalcon_duo_handling_instruction.pdf https://directcablesystems.com/media/downloads_data/neutrik-opticalcon_pg-nf05_v27-2023_01.pdf https://directcablesystems.com/media/downloads_data/reference-projects-opticalcon.pdf https://directcablesystems.com/media/downloads_data/certificate_eurofins_c6m22103-0020-104437.pdf https://directcablesystems.com/media/downloads_data/cb_test_certificate_se-103019.pdf |
|---|---|
| Change Image | Yes |
| Neutrik Code | NO2-4FDW-1-A |
| Datasheet | https://directcablesystems.com/media/downloads_data/no2-4fdw-1-a.pdf |
| Price on Application | No |
| Non-Priority | No |